Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Traffic per LAC

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 6th September 2009 at 11:22 #58713
    Lena
    Guest

    Hi,
    Can anyone inform how much traffic one LAC can handle by one BSC.

    Regards,
    Lena

    8th September 2009 at 05:42 #58714
    Bijoy
    Guest

    It depends on the BHCA of the BSC

    8th September 2009 at 06:06 #58715
    Pix
    Guest

    The main constraint at BSC is probably the Paging processing capacity : if the LAC is too big, there could be too many pagings to process for the BSC.

    Don’t forget to cumulate the effect of all LACs in the BSC. For example, 4 LACs :
    LAC 1: handled by BSC A
    LAC 2: handled by BSC A and BSC B
    LAC 3: handled by BSC A
    LAC 4: handled by BSC B

    The total pagings in BSC A = pagings in LAC 1 + 2 + 3
    Total pagings in BSC B = LAC 2 + 4

    Even if BSC A only hosts 1 cell in LAC 2, it will have to process the full amount of pagings of LAC 2.

    Best Regards,
    Pix

    15th September 2009 at 00:06 #58716
    Kike
    Guest

    you have to check how many cells are in your LAC, after that you have to get the traffic for those cells. is important calculate the BHCA for every LAC, and after you have to see the way to unload the signaling traffic for every cells because is in the SDCCH and the configutation parameters of BSC where you have the problem.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.