Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SET Parameter FOR TRHO

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 20th August 2009 at 04:39 #58505
    leila
    Guest

    HI PIX,

    I want to Implemnt trho in one of the congested cells iam using nokia equipment- Is it working with one neighbour, also i have another question about which parmetrs to implemnt in source and target and there threshold, specailly iam wannt to know abour ATPM—AMh Trho powerbudget margin–?

    10th March 2010 at 10:21 #58506
    goens
    Guest

    Hi,

    if you want to implement TRHO, the meaning is you must be implement to whole neighbor of this cell (or blocking cell). If the blocking cell as a target cell better you set very high value (greater than 35 or -65 dBm), or you can tuning on the next day if this value still to low and blocking still quite high. Many parameters related with TRHO or AMH as well. ALT, AUT, AML, ATCI, ATCM, ATPM, and also TRHO. ATPM can set for blocking cell as you prefer for optimized, .. based on my experience on my network is 16 or greater than 16 dB .. but for neighbors of blocking cell you can sets vary (maybe 0, 2, 4 depends on blocking on your nbrs). if ATPM = 16 still blocking, you can tune greater than this value…

    10th March 2010 at 11:19 #58507
    pix
    Guest

    thanks goens 🙂
    (i don’t wurk with nukia, surry)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.