- This topic has 1 reply, 1 voice, and was last updated 15 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
E1 routing from BSC to BTS site
The E1 resources are activated on the switch then interfaces are then crossed (MLTN)or mapped ( MLE). Then tap E1 from incoming port to the BTS.
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Telecom Design’ is closed to new topics and replies.
