Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TEMS Puzzle

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 3rd August 2009 at 19:45 #58278
    akefa
    Guest

    site_A in countery_A reaches the area of site_B in country_B with a bitter Rxlev than some a neighbour_B and a different BSIC.

    1- Will Site_A appear in the neighbours list of Site_B in TEMS?

    2- What if the two BSICs are same ?

    ThAnKs

    4th August 2009 at 15:23 #58279
    Vanderley
    Guest

    Hi,

    The question is not very clear but if you mean that you are in site A having neighbor from another country with better level same BCCH and ncc that is permited for sure you will have it in the list.
    Even I expect to go on it in idle.
    In dedicated if the BSIC is the same the BSC will try to initiate HO to your site and you will have HO failures

    5th August 2009 at 11:34 #58280
    akefa
    Guest

    Hi Vanderly
    Nice analysis

    Yes I mean that you are in a site having neighbor from another country with better level same BCCH.

    so your answer is Yes this case is possible but only if the sites have the same NCC !!

    What abour BSIC??

    thanks

    25th August 2009 at 10:02 #58281
    Bijoy
    Guest

    Even if they uses the same BSIC,if the A frequency is not in BA list of B it will not show as a neighbour

    31st August 2009 at 15:33 #58282
    Vanderley
    Guest

    It will happen if the neighbor NCC is in the list of permited NCC. There is no need to be the same.
    IF BSIC is the same the BSC will order the MS to handover to the cell in the list of your neighbours with this BCCH+BSIC. Usually you have HO fail.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.