Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TCH FAIL

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 23rd July 2009 at 23:40 #58162
    Efrix
    Guest

    Hi People;

    I’ve the famous TCH FAIL problems in one of my sector GSM 1900. I’ve already changed all the Hardware, feeders, connectors, TMA and antenna panels but the problems still continues. I don`t know if the problem is enginnes, RF planning or some bad configuration. I`ve still measured the ROE of the feeders and all is ok.
    someone knows why this happens?

    Please People, I don`t have Technnical support from Ericsson

    help me??

    25th July 2009 at 11:13 #58163
    Arash
    Guest

    Hi all
    I’ve nokia system in BSS part in my network and some BSC’s have TCH A_IF Fail for most of cells. for this reason these cells have high TCH drop because of a interface fail.
    Please give me a solution for solving this problem.

    26th July 2009 at 00:23 #58164
    Pix
    Guest

    duplicated post ?

    http://www.erlang.com/forum/erlang/thread.htx?thread=5165

    27th July 2009 at 13:38 #58165
    efrix
    Guest

    thank PIX..

    I`ve configured the most of my Cells in the same way. I have configured the first dTRU how Channel group 0 and it’s asigned how TCHControl. When this dTRU down, the TCHControl loss de sincro. I don’t know if this configuration is working in good order.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.