Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EDGE Low DL Throughput

Viewing 7 posts - 16 through 22 (of 22 total)
1 2
  • Author
    Posts
  • 20th August 2009 at 13:02 #57684
    DK
    Guest

    Hi Pix,
    Pls guide the following.
    What is TBF?
    Are you aware abut nokia topology in edge/GPRS defination.
    What is default and dedicated TS for data?
    If i have defined a FPDCH in one TRX then, this channel will be used for both the service (ie.GPRS/Edge)?
    And how the 2PDCH can achieve the max. speed by using 8PSK modulation?

    20th August 2009 at 13:32 #57685
    Pix
    Guest

    DK, sorry, i am not familiar with Nokia terms.

    a TBF is a connection allocated for one user, during its transfer. It is either UL or DL, so if a user has 2 transfers going on (1 DL and one UL), then it gets 2 TBF.

    21st August 2009 at 05:09 #57686
    DK
    Guest

    What is soft and Hard Blocking in Edge?

    22nd August 2009 at 09:52 #57687
    aso
    Guest

    Can you please explain more about nibble and bounce and to calculate

    4th September 2009 at 08:25 #57688
    KB
    Guest

    Pix,

    I have already change parameter,
    the result slightly impovement throughput only ~AVG 80 kbit/s max ~110 kbit/s ,pleaseeee help me 😉

    high traffic load 80 to 90%
    Max high from 2 to 5
    extend Extra TS 2 to 5
    min pdch = 1 , 4 tadhe

    thank you
    KB

    4th September 2009 at 12:08 #57689
    Pix
    Guest

    KB,

    I’m sure you will find a solution. But first of all, you must find where is the bottleneck 🙂
    Sorry I forgot about previous analysis, but what is your conclusion ?
    Do you think there is PS-congestion on Air, Abis, Ater PS, Gb interfaces ? (Which one? )

    Or do you think the radio quality is poor ? (lot of RLC blocks retransmitted)

    Please investigate your QoS stats…

    Cheers,
    Pix

    22nd September 2009 at 08:37 #57690
    KB
    Guest

    Hi Pix,

    PCT MSC UL retran every hourly >80% ( voice no blocking )

    Please help to investigate

    Thak you
    KB,

  • Author
    Posts
Viewing 7 posts - 16 through 22 (of 22 total)
1 2
  • The forum ‘Telecom Design’ is closed to new topics and replies.