- This topic has 4 replies, 1 voice, and was last updated 15 years, 5 months ago by
.
-
Posts
-
How to reduce drop HO around border BSC?
What equipment are you using?
For Ericsson Network:
1.Check the definition of neighbors it should be mutual for both neighbors.
2.Check the measurement frequency (MF). The Bcch of neigbor must be define at the MF of serving cell.
3.Check the external cell definition. The neighboring site which is homed at the other BSC should be define at the serving BSC.
4.Check the synchronization of all cells. Cells need to be synchronized for algorithm to take place.(better ask support from core engineers on this matter)
Hello,
It is the same checklist as below for Alcatel-Lucent, except the cell synchronization.
The cells can be asynchronous, the HO will still be possible.anyway, the problem certainly lies in external cell & external LAC definitions in the OMC-R and in the Core Network.
Dear all
Could u pls explain drop HO inter BSC and how to reduceK,
you asked this question already…
… and we just answered.
do you want us to repeat all we have said ?
- The forum ‘Telecom Design’ is closed to new topics and replies.
