Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Public Emergency (TS12) Call Routing

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #56590
    Andy
    Guest

    Can anyone tell me if it’s possible to route a TS12 Public Emergency call based on Cell of origin?
    This is a private network, where one subscriber wants all emergency calls originating in one specific area to be routed to a special emergency desk. All other emergency calls within the network would be routed to a different desk.

    #56591
    paraHO
    Guest

    TWhich way TS12 calls originating:

    a) inside the private network and remaining inside private network?
    b) from inside going outside to public network?
    c) outside public network going into private network?

    ETS 300905 Third Edition (GSM0203) states

    Table 2: Teleservice categories and Teleservices
    “NOTE: Direct access to private networks is foreseen by recommended provision A.

    3GPP 22.003-800 does not mention private network.

    #56592
    Andy
    Guest

    Unfortunately, it’s not even that simple. It’s a “cross border” thing for the railway.
    What I need is for an emergency call initiated in one area to be routed to an emergency desk in one private network, but all others to be routed to the desk in a different private network.

    #56593
    paraHO
    Guest

    OK Andy need to do a bit of checking and comeback, but one more question, OK, is this GSMR?

    #56594
    Pan
    Guest

    Hello, Andy!
    Yes, it is possible. I think it’s possible to realize origination dependent emergency calls routeing on most vendor’s equipment. For example, by means of LMN parameter in Siemens.

    #56595
    Andy
    Guest

    paraHO … Yes, this is GSM-R

    Pan … the equipment in question is the Nortel DMS switch

    #56596
    Andy
    Guest

    Can anyone give me a little guidance on this issue yet please?

    #56597
    Andy
    Guest

    paraHO
    You said you’s check this out for me, did you ever manage to come up with anything

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.