Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BHCA for Huawei RNC

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 18th March 2009 at 19:17 #56310
    Mirc84
    Guest

    Hi,

    I need a method to calculate BHCA in one Huawei RNC.
    Could you give me a hint?
    I could also use a formula or a counter form another system.

    Would it be worng if I say that the number of RAB attempts is the number of call attempts?

    Thank you!

    22nd April 2009 at 18:30 #56311
    NG3G
    Guest

    hi,

    Radio Access Barrier is used to setup a connection (dedicated resource) between an RNC and a NodeB. RAB is one of the RRC features. So, an RNC is going to establish RAB when it going to receive/send a PS/CS signaling/data connection from/to a NodeB.

    If you would like to calculate the BHCA for an RNC, you need to consider all Signaling (LA, SHA,etc) and PS/CS traffic (voice call, vedio streaming, etc) genetated between the RNC and the NodeB.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.