Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Blocked Call

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • 27th February 2009 at 08:40 #56040
    Just Me
    Guest

    Hi, Pix
    Can you tell me, what is the reason of this problem. In TEMS layer s shows following message:

    MS1
    Disconnect

    Time: 20:46:57.25
    Frame number: 629587

    Transaction identifier : 8
    Protocol discriminator : (3) Call control; call related SS messages
    Message type : 37
    Cause
    Coding standard : (3) Standard defined for the GSM PLMNS
    Location : (2) public network serving the local user
    cause value : (1) Unassigned (unallocated) number

    Header dump (Hex):
    BD 00 07 00 00 00 04 07 00 02
    05

    Message dump (Hex):
    83 25 02 E2 81

    _____________________

    MS1
    Time: 20:46:57.25

    Blocked Call
    Block type: No Alerting or Connect
    CC Cause:Unassigned (unallocated) number
    , call time: 9313 ms

    27th February 2009 at 18:40 #56041
    Pix
    Guest

    When does it happen? During a call? on the TCH or on the SDCCH? after HO?

    28th February 2009 at 04:46 #56042
    Pan
    Guest

    Dear, Just Me!
    There some of possible reasons for this response are:
    – called subscriber is absent in HLR, or

    28th February 2009 at 05:07 #56043
    Pan
    Guest

    Sorry, I can’t to post the rest. Why? Anybody know?

    28th February 2009 at 05:13 #56044
    Pan
    Guest

    – routeing table in your (most likely) MSC

    28th February 2009 at 05:16 #56045
    Pan
    Guest

    …does not contains the routeing for called subscriber number, or

    28th February 2009 at 05:29 #56046
    Pan
    Guest

    Originally it looked as follows:)
    Dear, Just Me!
    There some of possible reasons for this response are:
    – called subscriber is absent in HLR, or
    – routeing table in your (most likely) MSC does not contains the routeing … for called subscriber number, or
    – (if home called subscriber is in roaming) routeing table in your (most likely) MSC does not contains the routeing … for Routeing number (MSRN) from the called subscriber current visited network.

    28th February 2009 at 05:32 #56047
    Pan
    Guest

    Now I know this terrible word 🙂
    This word is….is….

    28th February 2009 at 06:55 #56048
    Pix
    Guest

    Routing ?

    28th February 2009 at 06:56 #56049
    Pix
    Guest

    Entry ?

    28th February 2009 at 06:59 #56050
    Pix
    Guest

    information? path? next hop?

    Pan,
    if i can’t find the word… then i wonder:
    why do you have to use a dirty word when you’re explaining routing ?? 🙂

    28th February 2009 at 07:18 #56051
    Pan
    Guest

    🙂 r.le! this terrible word is r.le!..one I can’t write. I want to use this word again and again and nothing else. It is the first word that came in my mind. r.le! r.le! r.le!

    28th February 2009 at 08:07 #56052
    pix
    Guest

    role

    28th February 2009 at 08:09 #56053
    pix
    Guest

    r.le with an “u”.

    wow, man, you’re gross.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.