Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

incoming ho

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • 26th January 2009 at 13:57 #55529
    mouf
    Guest

    hi all

    i have e cell facing incoming ho = 0%. the cell is not congested, ho parameters are well configured. please help me!!!

    26th January 2009 at 14:42 #55530
    adcguy
    Guest

    Hi mouf, are you able to initiate calls in that particular cell?

    26th January 2009 at 19:45 #55531
    pix
    Guest

    hi mouf,

    e cell = external cell ?

    Then it’s probably a MSC misconfiguration. And if each cell belongs to a different MSC, then it’s even more probable than one of the two MSC is misconf.

    Check routing tables, LAC definition, CI definition, and whatever (i don’t know the details at all). One thing certain : inc ho = 0% means there are HO requests. Therefore the serving BSC is aware that the e-cell exists.

    Therefore, the description of you e-cell in your OMC-R is correct.

    Good news if you’re working at the OMC-R… Bad one if you’re a NSS guy 🙂

    Regards,
    Pix

    27th January 2009 at 10:49 #55532
    mouf
    Guest

    Hi All,

    adcguy : response to your question is yes. The cell carried traffic and do outgoing handover .

    Pix,

    It is a misunderstanding. I mean “a cell facing” not ” e cell”.
    All neighbors belong to the same BSC , one LAC et…
    In Incoming, we ‘ve got no HO requests and no HO attempts.
    In outgoing everything is OK.
    (Alcatel vendor). The cell is not at a border location.

    Thanks for any help!!!

    27th January 2009 at 12:55 #55533
    pix
    Guest

    Hi,

    There were similar problems in B8. Two possible actions:
    Restart OMU
    or change the BSIC (this i’m not sure… perhaps, you should rather try to delete the cell and recreate it from scratch)

    If nothing works, then you should raise the issue to your TAC. In which release are you?

    27th January 2009 at 14:26 #55534
    mouf
    Guest

    Hi Pix,

    The release is B9.
    Thanks.

    30th January 2009 at 08:24 #55535
    Alex_R
    Guest

    Dear mouf

    did u check uplink signails of this cell may be link inbalance exist ?

    31st January 2009 at 20:05 #55536
    TNS
    Guest

    Hi, mouf.

    Are you sure parameter RxLev_min(n) is low enough?

    May be I should activate General Capture HO towаrd this cell ( just to get some requests )…

    BR

    18th February 2009 at 13:58 #55537
    Mouf
    Guest

    Hi all

    I solve the problem of incoming ho by deleting and recreating all relations of my cell.

    thanks!

    8th August 2009 at 12:07 #55538
    adi
    Guest

    Hi all,

    I have a poroblem in a cell in remote area have bad incomming and out going hanover.
    The distance between the nieghbor cells is 35 km antena height=75m
    im using erisson equipment TCC feature is activate on this cell.

    pls help..

    14th June 2011 at 12:59 #55539
    Alexia
    Guest

    In calculating HOSR do we consider both incoming and outgoing??

    I have some cells with poor incoming but excellent outgoing handover successes.

    14th June 2011 at 16:47 #55540
    pix
    Guest

    hi alexia,

    but then, in another cell, you have very poor outgoing and very good incoming % 🙂
    normally, you should consider only the outgoing ho in the HOSR.

    regards
    pix

    20th September 2018 at 07:28 #55541
    Harison
    Guest

    Hi,
    I don’t understand the Incomming HO and Outgoing HO. Could you to give me their threshold?

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.