Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cell Identifier List in Paging Message

  • This topic has 3 replies, 1 voice, and was last updated 16 years ago by bipin jaiswal.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 13th December 2008 at 12:17 #55032
    Sachin
    Guest

    Hi All,

    Can anybody let me know how many maximum cells the MSC can indicate in “Cell Identifer List” element in the Paging message.

    [Refer TS 48.008, section 3.2.2.27]

    I understand that information about a cell would be max. 7 octets in “Cell Identifer List”, but I dont know the maximum number of cells contained in the list.

    I need this information for decoding the Paging message using a decoder tool.

    Regards,
    Sachin

    16th December 2008 at 04:52 #55033
    Pan
    Guest

    Dear, Sachin!
    There is 8-bit Length indicator in the Cell Identifer List IE. Hence, the length of the cell id’s field and cell discriminator field no more than 2^8 byte. You may count yourself the number of the cell depending on cell discriminator – CGI (7 byte), LAC+CellID(4byte), CellId only (2byte).
    With regards, Pan/

    16th December 2008 at 10:31 #55034
    Sachin
    Guest

    Thanks Pan,

    I got to the same approach myself.

    Thanks,
    Sachin

    16th December 2008 at 15:00 #55035
    bipin jaiswal
    Guest

    Can anybody let me know about a CIC(circuit identifier code) calculation algoratithm for ASSIGNMENT COMPLETE Message of BSSMAP layer?
    As per my understanding,If BSS allocates CIC,BSSMAP needs to send it in ASSIGNMENT COMPLETE Message.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.