[Olivier]

According to the Erlang principle, we have:
7TCH/TRX
0,5Er/TCH
It means that 1TRX = 3,5 Erlangs;

Those principles permit us to dimension the BSS equipement.

For exemple,
1PCM = 1Ater = 30CIC
1CIC = 0,88Er —> 1Ater = 22Er

If we want to add 22Er trafic, we must add 1Ater in the BSC, 30CIC at the MSC side, and 1 PCM must be available for carring.

[Khalid]

Hi Guys,

Can anyone help me by providing a documentation of Commissioning and Integration of Nokia RNC and an overview of this product.

kelidris@hotmail.com

Many thanks.

Khalid

[mpanjato]

hi all
i want to now the DUAMCO, DIAMCO, FICOM, LMU rule on the BTS siemens product.
detail information if possible
best regards
Mpanjato

[Mill]

What is BHCC?

[john]

one day while i was monitoring pcm for ericson rbs i got the following:what do they mean
Fault Status LOF DP 0: NOT-FAULTY
Fault Status LOF DP 1: FAULTY
Fault Status LOF DP 2: FAULTY
Fault Status LOF DP 3: FAULTY
Fault Status LOS DP 0: NOT-FAULTY
Fault Status LOS DP 1: FAULTY
Fault Status LOS DP 2: FAULTY
Fault Status LOS DP 3: FAULTY
Fault Status AIS DP 0: NOT-FAULTY
Fault Status AIS DP 1: NOT-FAULTY
Fault Status AIS DP 2: NOT-FAULTY
Fault Status AIS DP 3: NOT-FAULTY
Fault Status ERATE DP 0: NOT-FAULTY
Fault Status ERATE DP 1: NOT-FAULTY
Fault Status ERATE DP 2: NOT-FAULTY
Fault Status ERATE DP 3: NOT-FAULTY
Fault Status CSES DP 0: NOT-FAULTY
Fault Status CSES DP 1: NOT-FAULTY
Fault Status CSES DP 2: NOT-FAULTY
Fault Status CSES DP 3: NOT-FAULTY
Fault Status RAI DP 0: NOT-FAULTY
Fault Status RAI DP 1: NOT-FAULTY
Fault Status RAI DP 2: NOT-FAULTY
Fault Status RAI DP 3: NOT-FAULTY
Fault Status UAST-OUTG DP 0: NOT-FAULTY
Fault Status UAST-OUTG DP 1: NOT-FAULTY
Fault Status UAST-OUTG DP 2: NOT-FAULTY
Fault Status UAST-OUTG DP 3: NOT-FAULTY
Fault Status UAST-INCOM DP 0: NOT-FAULTY
Fault Status UAST-INCOM DP 1: FAULTY
Fault Status UAST-INCOM DP 2: FAULTY
Fault Status UAST-INCOM DP 3: FAULTY
PLS HELP ME

[Santosh]

Can any1 explain me what are the advantages of SS7 over R2MF signalling ?

[hi i am hashem]

hi im hashem from korektel/iraq ,i waork in cellplanning, and do drive test and finding problem in network ,i need some information about tunning and optimization,
BR. Eng hashem from korektel

[gopal]

can anyone explain me about Rxdiversity of a antenna.Or what do you mean by diversity of a antenna?

[sk]

how much time it takes to make a new frame in gsm?

[Godar J. Ibrahim]

what is the best MMSC product that is compatible with Ericsson CS 3.0 and MIEP 3.0 ?
thanks

[euge]

can anyone explain in simple terms what frequency hopping is and its relevance in telecommunication

[roopa]

hi Godar
i guess the best one has to b ericsson mmc r4.0 . which one r u using?

[ayat]

hello ,all
Plz can you help me to know how convert the traffic (GSM system ) to time and money ?
if i have certain cell has 12 TCH so des. traffic (ERLB) table =6.615 and the carried traffic (real traffic)= 9.05 ERl in Busy hour how i can convert the traffic to time to claculate the money or the benefit
thanks

[Pix]

hello,

9.05 erlangs at the busy hour = 9h03 of calls (1erlang at busy hour is equivalent to 1h of voice calls)

so now you have to multiply 9h03 (543 minutes) by your average cost per minute (ratio of postpaid and prepaid, etc…)

good luck.

[Ayat]

Dear Pix
i did not understand your answer
could you explain by Details
i did not known what about 9h03
and from where you find it
thanks

[Author]

Posts