Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TRXs per CHGR (Ericsson)

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 4th November 2008 at 17:28 #54564
    Alex
    Guest

    Suppose 3 CHGRs are defined per cell.CHGR=0 is BCCH CHGR,CHGR=1 & CHGR=2 have a different Frequency Set(SFH).
    As MAIO definition is depended on the number of TRXs per CHGR so:
    How can we understand how many TRXs are defined in different CHGR?(By which command)

    BR,

    23rd July 2009 at 19:50 #54565
    RNP2
    Guest

    Hi Ericsson Expats,

    Suppose we have 3 channel group (CHGR) for a cell as below:
    CHGR 0 – ARFCN=5 (MAIO = Default)
    CHGR 1 – ARFCN= 30, 35 (MAIO = 0 1)
    CHGR 2 – ARFCN= 32, 38, 40 (MAIO = 0 1 2)

    How the TRXs will hop ? And what does MAIO = Default ( this is for the BCCH )mean?
    Can any 1 explain please? I am new in Ericsson system.

    23rd July 2009 at 21:04 #54566
    RNP2
    Guest

    Another important thing I forgot to mention: “Hop” (hopping) is ‘on’ for all these three channel group.

    24th July 2009 at 16:48 #54567
    RNP2
    Guest

    Any one can help please??

    26th July 2009 at 17:43 #54568
    krish
    Guest

    hi,
    Do u have dual band?otherwise it will hop in chgr 1 and 2.chgr 0 always for bcch and it will not hop.

    29th July 2009 at 21:40 #54569
    RNP2
    Guest

    No, we don’t have dual band.

    CHGR0 is always for the BCCH as I read also. But in our network configuration I found more then 1 frequency has been configured in CHGR0 and hop is enabled.

    What will happen in that case?

    Also I saw for a cell, there is only 1 channel group (CHGR0) and this channel group has 6 frequencies.
    What will happen in that case also?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.