Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2 bcch on a cell ???

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • 31st July 2008 at 16:11 #53312
    newbie
    Guest

    Hi friends,
    I am new on bsc ericsson system.
    I have a problem. in one site, there are 2 bcch on a cell and the other cell no bcch!
    how can i solve this problem via bsc commands(what parameter)?

    Thanks in advance,

    31st July 2008 at 19:06 #53313
    pix
    Guest

    oO

    that’s amazing. sorry, i can’t help you.

    1st August 2008 at 08:06 #53314
    newbie
    Guest

    By RXCDP command shows this situation:
    one tx is in unused state and some timeslots of another trx(just one trx) are also in unused state but the timeslots of unused tx are config!

    the site is configured 4+4+4
    in cell_A no problem.
    in cell_B (by rxcdp) 2 bcch
    and in cell_C no bcch and the last tx is unused.

    I guess I should a/some command to change parameter(s) to solve this problem but I don’t know what it is.

    3rd August 2008 at 09:31 #53315
    msa
    Guest

    hi newbie
    you can use this comman to change the bcch
    first for cell b use this command to delete extra bcch frequency
    rlcfe:cell=cellb,chgr=0 ,dcchno=.;
    and for cell c
    rldec:cell=cellc,bcchn=,cgi=,;
    regards

    5th August 2008 at 20:47 #53316
    Asif A
    Guest

    Hi NewBie,

    1st remove extra BCCH from Cell B by command
    RLCFE:CELL=CELLB,DCHNO=;
    OR
    RLCFE:CELL=CELLB,CHGR=,DCHNO=;

    After that create BCCH in Cell C by command
    RLCFI:CELL=CellC,DCHNO=;
    OR
    RLCFI:CELL=CellC,CHGR=,DCHNO=;

    Or you can change by the command
    RLDEC:Cell=CellC,CGI=,BSIC=,BCCHNO=;

    Hope u satisfy now.

    Regards,

    Asif A

    12th August 2008 at 15:01 #53317
    mm
    Guest

    Hi,
    Can you tell me, What is TBF?

    15th August 2008 at 07:07 #53318
    newbie
    Guest

    thanks to all,

    18th August 2008 at 07:49 #53319
    mm
    Guest

    Hi,
    I am telecom Engineer. Can you tell me about AMR

    28th August 2008 at 14:34 #53320
    ozibo
    Guest

    hi newbie, tell me how many channel group you have on cellB.
    thanks

    29th August 2008 at 09:43 #53321
    newbie
    Guest

    Hi,
    there are 2 channel groups per each cell : 0 and 1
    every things seems ok and I am confused.
    Infact there are no 2 bcch on a cell, but by RXCDP command there are 2 AFRCN in TX-4 and TX-6 (configuration4+4+4) that I suppose 2 bcch in a cell.

    Regards,

    21st November 2009 at 00:54 #53322
    Eddy
    Guest

    Please how can I get a TRX count per band on Ericsson network?

    13th October 2010 at 10:23 #53323
    AS
    Guest

    SD

    10th July 2011 at 19:29 #53324
    Kapil
    Guest

    Plz tell me cocept of cofact?

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.