- This topic has 1 reply, 1 voice, and was last updated 16 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Dear All,
My question is about caller ID supporting by AXE810.
In our network we use AXE810 as a transit switch between PSTN and Local network.
AXE810 connection to PSTN is through #7 Links and to local networks(PBX’s) through PRI and
our PBX support caller ID.how i can active caller id in AXE810 for showing Extension numbers when go to PSTN and when connect from one PBX to other PBX?
if any procedure avalable who can send for me?
Best Regards.
In AXE if u wil check the anbsp:b=XX-###; there should be one parameter i.e.”nw” shold be present.
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Telecom Design’ is closed to new topics and replies.
