Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

B-number vacant series

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 26th June 2008 at 18:37 #52938
    SA
    Guest

    Hi,

    What does B-number vacant series EOS 100 indicates ?

    Does it imply associated routing case for a particular B-number series is not defined.

    Thanks,
    SA

    27th June 2008 at 10:29 #52939
    VK
    Guest

    Yes, when routing in MSC does not exist for the number dialed by subscriber then it takes the specified EOS.

    27th June 2008 at 16:20 #52940
    SA
    Guest

    so it could lead to calls particular destination not maturing if not configured and hence “might be” resulting in revenue loss..

    And to confirm this B-table will be required to be analyzed to pin point the destination series.

    Is this understanding correct, as well?

    8th July 2008 at 14:22 #52941
    scor
    Guest

    Hi VK,

    Does every call will be validated in EOS table

    thks

    9th July 2008 at 07:32 #52942
    SA
    Guest

    Eos is not a table, and call need not be validated against these codes

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.