Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RACH overload on Abis

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • 22nd February 2010 at 17:57 #52838
    pix
    Guest

    hello safar,

    from what i gathered, the call can’t be setup it the MS is located further than 10 T.A.

    regards,
    pix

    23rd February 2010 at 15:09 #52839
    safar
    Guest

    hi pix,

    Thanks dear.but are i sure because maxta and talim are for dedicated mode not for idle am i right? Plz clear if i so,e wrong here.

    23rd February 2010 at 15:59 #52840
    ilyasse
    Guest

    hi all!
    i am new i want introduces myself

    23rd February 2010 at 20:14 #52841
    Pix
    Guest

    the MS sends a Channel Request
    The BTS receives the Channel Request, and computes the TA
    If TA > 10, the Channel Request is discarded
    if TA < 10 : the Channel Request is processed After few attempts, the MS will try to reselect another cell.

    24th February 2010 at 11:07 #52842
    pawandeep
    Guest

    Hi….
    Talim is urgency algorithm:if MS cross the talim value….MS then looks for the NBrs if not found call gets dropped.

    MAXTA is disconnection algorithm:when MS cross the Maxta value it will disconnect MS from the network related services.

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • The forum ‘Telecom Design’ is closed to new topics and replies.