Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

difference between CF and TG ?

  • This topic has 4 replies, 1 voice, and was last updated 7 years ago by Amrit Mandal.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 22nd October 2007 at 18:18 #49524
    john_rob
    Guest

    Hi friends,
    what is the difference between CF and TG (in command of ericsson)?(ex. reset with CF or TG)
    when should i use command with cf(rxocf) and when tg?

    thanks.

    24th October 2007 at 02:23 #49525
    Mucky
    Guest

    Dear John,

    CF is only representation of DXU state in the RBS and TG is represent which cell are connected to the Transceiver Group. TG is used when we have problem with MO,which affected to the cell.So if you want to loading new software to the RBS,it should be reset the TG,other way you only reset the CF(DXU) to maintain the local problem on the RBS(especially when the DXU Fail to loading caused by Power or Transmission Problem)

    24th October 2007 at 05:51 #49526
    john_rob
    Guest

    Dear Mucky,
    thanks a lot,
    To maintain the local problem i only reset the CF.
    when software shows sectors blocked, can i consider it is the local problem first, and use CF reset?

    25th October 2016 at 00:14 #49527
    James M
    Guest

    Thank you

    21st December 2017 at 03:01 #49528
    Amrit Mandal
    Guest

    Hi,
    please tell me what is the full form of TG & CF ?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.