Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Siremens Flex CU

  • This topic has 3 replies, 1 voice, and was last updated 15 years ago by kishor kumar c b.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 25th September 2007 at 15:51 #49304
    RK
    Guest

    Can someone tell me if using FlexCU reduces the RF power to half ? My understanding is that FlexCU is for doubling the capacity in the same footprint, but what is the impact on the RF ? Will this apply to BS-82II ?

    Appreciate your comments.

    RK

    27th September 2007 at 14:31 #49305
    Tomar
    Guest

    Hi RK,
    FlexCU has lower output power by 1.3dB for GMSK in comparison with ECU and 2.3dB for 8PSK. FlexCU could double the capacity in the same footprint. But take care about combiners. For (F)DUAMCO 4:2 is the limit 4 logical TRX. And also be aware about COBA. For COBA2P8 could manage 8logical TRX and COBA4P12 could manage 12logical TRX. For bigger configuration you need COSA module.
    FlexCU is possible also to use in EMICRO II but with proper setting of parameter CUCONF (output power is lower). It is due to emission of heat.
    BR
    Tomar

    28th September 2007 at 16:08 #49306
    RK
    Guest

    Thanks, Tomar for this clarification!

    26th October 2009 at 08:32 #49307
    kishor kumar c b
    Guest

    what is f duamco, cu , dulna

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.