Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Penalty Timers

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 21st September 2007 at 05:01 #49260
    Ali
    Guest

    Hi all,

    i hope all is fine at your end, can any of you RF Gurus explain how does the Penalty Timers actually works, and implemented.moreover,
    is it ericsson specific or a generic, and what we called it in Alcatel

    Thanks in advance.

    25th September 2007 at 12:16 #49261
    Ajay
    Guest

    Dear Ali,
    Penalty timer is actually used in calculation of C2. Well, this timer works/stars when the MS places a non-serving cell on the list of six strongest carriers. Value of this timer is broadcast on the BCCH. This works in Siemens Equipments.

    Case 1
    As long as the timer runs and Penalty Timer which is send on broadcast is less than 31
    C2=C1+CRESOFF-TEMPOFF

    Case 2
    If the timer has expired and Penalty Timer is less than 31
    C2=C1+CRESOFF

    Case 3
    If Penalty Timer is equal to 31
    C2=C1-CRESOFF

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.