Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Paging Success Rate

Viewing 13 posts - 76 through 88 (of 88 total)
1 2 3 4 5 6
  • Author
    Posts
  • 10th February 2012 at 08:47 #48752
    Ezekiel Kilasi
    Guest

    How can I improve PSR and LU in Ericsson and Huawei Network?

    15th April 2012 at 11:08 #48753
    viknesh kumar
    Guest

    how to improve psr in ericsson based msc/mss

    16th April 2012 at 10:36 #48754
    Mohamed
    Guest

    How to improve PSR in Ericsson Network? With the differents steps. Please.

    25th April 2012 at 02:24 #48755
    Ater
    Guest

    Hi Mohamed
    There are many ways to improve the psr. All depends of the reasons for bad psr

    Check your paging strategies (Alex will give you diferent strategies depending on your’s network size and topology)

    Then you need to check counters

    Is the number of pages/seg to High?
    Is the number of pagecong or pagetoold (on cell level ) to high?
    if so
    Maybe you can split the location areas with bad psr in two
    If you can’t do the LA splitting maybe you can add a new CCCH to all the cells with the highest number of pagecong and pagetoold (this can be done with a G11 feature called “multiple CCCH”)

    these three simple steps will improve your psr

    20th December 2012 at 04:03 #48756
    Prashant Kumar
    Guest

    how to improve psr in Moto system, plz give me the step by step procedure.

    23rd July 2013 at 09:04 #48757
    pia
    Guest

    How can we improve the PSR in E// network, please

    26th July 2013 at 16:46 #48758
    pix
    Guest

    pia,

    are there paging congestion ? (in BTs or in BSC)

    otherwise, you will need to tune some NSS parameters (paging repetition timer, paging repetition areas).

    There is a new feature called smart paging, or somthing like that.

    regards
    pix

    1st August 2013 at 12:18 #48759
    pia
    Guest

    Hello PIX,

    could you please specify the values of the Paging repetition timer, and more explain about the paging repetition areas

    2nd August 2013 at 13:38 #48760
    pix
    Guest

    pia,

    all those are NSS parameters.. Basically, how many times a paging shall be repeated if there was no answer to the first paging.

    And how much delay between two repetitions.

    Paging area : the first paging is send over the LAC for CS, and RAC for PS (except with “smart paging”, where the paging is sent at cell level initially -to be confirmed-)

    In case of no answer, the repetition can be broadcasted still at LAC level, or on all LAC of network, or on several BSC, etc.

    If you find someone who works at NSS level, just ask, he can explain all.

    regards
    pix

    30th August 2013 at 05:35 #48761
    Arthi
    Guest

    CHUPAT
    MCEDHC
    RCCGD
    RXCBM
    RXCMSD
    SHCHM
    SHSMS
    TRARE

    hi team,

    Kinldy provide the Function of above block in Ericsson BSC.

    20th January 2014 at 04:56 #48762
    smita
    Guest

    i am doing my project in location management in cellular network.my aim is to reduce the total cost which is update cost +paging cost
    i would like to implement this successful paging and location update in matlab software.

    26th June 2014 at 04:33 #48763
    Surender
    Guest

    How to improve location update success rate?

    22nd April 2017 at 05:53 #48764
    Ayat
    Guest

    Hello all
    Pix
    We enable precise paging in level bsc we checked the counters notice that we have precise paging for 3 time in level radio only while cs configurstion support first and second paging only one of our engineer recomend to enable third paging in core leve , so why we need this while we have third paging in radio??

  • Author
    Posts
Viewing 13 posts - 76 through 88 (of 88 total)
1 2 3 4 5 6
  • The forum ‘Telecom Design’ is closed to new topics and replies.