Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MML command list

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 4th July 2007 at 17:38 #48043
    NicSan
    Guest

    Hi Everyone,

    I need to find MML command list,I am getting started in Telecom, but i need quickly update.

    Thx.

    5th July 2007 at 02:32 #48044
    Rahul Soni
    Guest

    Can u Pls give more info (system, req, etc).

    6th July 2007 at 23:55 #48045
    nicsan
    Guest

    to integrate BTS, Ericsson 2106i in both frecuency 1900 and 850.

    7th July 2007 at 14:44 #48046
    patrick.fr
    Guest

    MML for Nokia.

    You must practice if you become better.

    Menu are simple, follow it.

    Z; => back

    ; => valid your command

    Example of basic command:

    ZEOL; => all BTS alarms ON

    ZEOH:date:time: ; => history of alarm BTS

    ZEEL:BL; => all BTS Blocked

    ZERO:bcf; => detail of BTS

    ZAHO; => alarms BSC ON

    ZAHP:date:time: ; => history of alarm BSC

    ZDTI; => all lap D

    ZUSI; => all card in BSC

    ZUSC:… ; => Lock unlocked BSC card

    ZUSU: … => reset of BSC or card BSC

    25th February 2010 at 13:41 #48047
    Giridhar
    Guest

    Hi Everyone

    Can anyone give a entire list of MML commands

    28th February 2010 at 09:48 #48048
    msa
    Guest

    also for RNC if possible list all available commands with their functios

    28th February 2010 at 14:08 #48049
    Kumar
    Guest

    Hi,
    Can anyone please tell me what can be the possible cause for when a network initiated USSD request is followed by a release message from the network.

    For example, network (MSC/HLR/VLR) sends a USSD request to the MS. Before the MSC can send MAP OPEN RSP to the HLR, the it receives RELEASE COMPLETE message from BSS.

    Now, what can be the possible cause and solution for above problem. Please note that, the issue is being faced in Huawei Core & BSS network. The problem occurs randomly and not for all the calls e-g issue is observed with 1 call out of 10 calls.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.