Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Ericsson RBS

Viewing 15 posts - 31 through 45 (of 134 total)
1 2 3 4 … 7 8 9
  • Author
    Posts
  • 15th May 2008 at 03:44 #47618
    Md.Mafiul Islam
    Guest

    Dear All,
    Can anybody please give me the details operation difference between Minilink TN service manager6 to Minilink Craft
    Best Regards,
    Mafi

    30th May 2008 at 10:11 #47619
    SULIMAN
    Guest

    HOW TO MAKE RBS2206 CONFIGRATION (3/3/3)USING OMT?
    STEP BY STEP

    30th May 2008 at 21:53 #47620
    ravisharma
    Guest

    i want to knw the difference between dxu21 and dxu31? and function of CF

    27th June 2008 at 00:06 #47621
    jamil
    Guest

    Hi could any one help me in RBS2116 about alarm and about battery disconact at the BBS (pfu)
    and battery not charge and the OMT r34-9 configration 3 psu only
    please my email is jamil_el_banna@hotmail.com

    2nd July 2008 at 13:58 #47622
    emre igrek
    Guest

    are you sure your idb created with 2116 ?
    if u see 3 psu only you installed 2216.
    have to check your idb.

    2nd July 2008 at 14:08 #47623
    emre igrek
    Guest

    hi SULIMAN
    there is no way to conf 3×3 .you must use 3×4
    wanna explanation ?

    2nd July 2008 at 14:16 #47624
    emre igrek
    Guest

    Md.Mafiul Islam

    do u mean service manager6 is “msm 6.0” ?
    if true
    in msm u have limited conf. capabilities
    freq., id, channel alarms, etc…

    in craft you can configure modulation, routing, advanced tcp/ip network settings, etc…

    14th December 2008 at 11:07 #47625
    Esmaeil Najar
    Guest

    HI SEND ME 888 CABLING IN RBS2216 PLEASE

    24th December 2008 at 12:05 #47626
    parsa
    Guest

    How much power get from RBS 2116?

    29th December 2008 at 12:42 #47627
    fred sabiiti
    Guest

    am your subcontract employee who met ericsson’s equipments many times so i wish your training concerning RBS2116/2216 CONFIGURATIONS

    2nd January 2009 at 09:33 #47628
    Mucky
    Guest

    Hi Ravishama,

    dxu21 is using in RBS 2X06.
    dxu31 is using in RBS 2X16.
    anyway CF means Common Function with the general function operational software loading to this equipment..so if CF is not OPER so the TRX can’t be operational.

    7th January 2009 at 14:08 #47629
    kofi ansah
    Guest

    like to know more about the RBS 2116 installation and testing and about a full cell site.

    10th January 2009 at 14:00 #47630
    finn
    Guest

    CF? I think its central funtions right?

    12th January 2009 at 07:52 #47631
    emre iğrek
    Guest

    hi Esmaeil
    there is no way to create 888 conf. or i dont know how can it be.For learning cable list create idb than,right cilck to installation database box(in system section )>display> cable list.
    u can find all rx jumps.

    14th January 2009 at 10:07 #47632
    Ratana dinh
    Guest

    What is the paramet of RBS 2206?

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 134 total)
1 2 3 4 … 7 8 9
  • The forum ‘Telecom Design’ is closed to new topics and replies.