Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CA list

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 4th December 2006 at 19:17 #46256
    celt
    Guest

    can anyone help me with CA list, when i use Tems pocket monitor on my phone i only see the BCCH frequency for the sector. should i not see all the transmitted frequencies for the sector. i.e if the BTS in configured as 2,2,2 should i not see the 2 frecuency channels for each sector, i only see 1 for each sector, can anyone explain this

    6th December 2006 at 05:22 #46257
    rf learner
    Guest

    Hi Celt.

    there are actually 2 list CA list and BA list.

    CA lists frequencies that are used for carrying calls.

    BA lists frequencies that are used for measuring SS of BCCH for nbr listing, HO candidature Listing purposes.

    2+2+2 config if u r using SFH there will no. of frequencies used for hopping.

    thanks

    RF Learner

    6th December 2006 at 10:12 #46258
    celt
    Guest

    hi rf learner
    yes i know there is CA list and BA list,with BA list i see the neighbouring cells for the cell i am locked on to but my question is if the cell i am locked on to is configured with 2, 3 or 4 TRX should u not see the frequencies for these TRX on the CA list when frequency hopping is not being used.if frequency hopping is used i see 16 frequencies in my CA list why dont i pick up the other frequencies if hopping is not being used, thanking you if u have any ideas

    7th December 2006 at 09:28 #46259
    rf learner
    Guest

    Hi Celt

    So u r not using any kind of hopping.

    Thanks

    RF Learner

    7th December 2006 at 22:19 #46260
    celt
    Guest

    hi rf,
    some sites in the network are using frequency hopping but the majority of sites are not using hopping.the sites that are using hopping i see all the frequencies for hoppng in the CA list where as the non hopping sites i only see the bcch frequency in the CA list

    19th November 2010 at 09:02 #46261
    JACK
    Guest

    In the call setup phase we have to include only BCCH frequencies on the Cell Allocation list that is sent in System Information type 1 message on the BCCH

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.