Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RBS 2×06 Traffic Handling

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 1st July 2006 at 20:49 #45310
    Mikey
    Guest

    Can anyone give me an idea as to why a cell will only be carring “Handover” traffic. You cannot initiate a call on the cell, but call initiated on adjacent cell are being accepted.

    Erisson RBS 2206 and Ericsson BSC..

    3rd July 2006 at 06:23 #45311
    Pavel
    Guest

    It happens, when cell is not defined at MSC side, or defined incorrectly at MSC side.
    CGI parameter at MSC for cell should be equal to CGI at BSC side for this cell.

    To define cell at MSC:

    mgcei:cell=CELLNAME,cgi=CGI;

    To find CGI at BSC side:

    rldep:cell=CELLNAME;

    29th August 2006 at 14:58 #45312
    Mikey Browne
    Guest

    Hi,

    Can someone assist me in interpreting the information below:

    MO STATE BLSTATE BLO BLA LMO BTS CONF

    RXOTS-128-9-0 NOOP BLO 0010 0008 0500 ENA ENA

    I am trying to interpret the HEX values, that give information on the likely reason for the MO being blocked.

    Thank You

    30th August 2006 at 06:38 #45313
    Pavel
    Guest

    I don’t know, how to decode this faultcode,but actually I am not shure, that decoding will give you result, because MO is TS, and it is very primitive.

    Try to execute
    rxcdp:mo=rxotg-XXX;
    rxasp:mo=rxotg-XXX;
    rxmfp:mo=rxocf-XXX;

    It will show you clear picture over this BTS.

    If you will paste it here – we can try to understanf why it is faulty.

    30th August 2006 at 13:33 #45314
    Mikey Browne
    Guest

    Results to the following commnads below:

    rxcdp:mo=rxotg-XXX;
    rxasp:mo=rxotg-XXX;
    rxmfp:mo=rxocf-XXX;

    19th September 2008 at 20:25 #45315
    hassan
    Guest

    when a cell is defined wrong in MSC,I mean CGI is different in MSC and BSC, nobody can initiate a call, but only MS from internal neigbours can move into the cell.
    So check CGI in BSC and MSC,they must be equal.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.