Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Confusion about T1

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 30th August 2005 at 18:36 #42071
    Minnie
    Guest

    Can somebody give me a manual or study material for :
    1) Cell Planning
    2) how to decide about what number of T1’s to be used for a site.
    3) I am really not sure how the T1 works with number of radio and channels. These things make be confused. So if someone can explain it for me, I will be really thankful.

    Thanks
    -Minnie

    31st August 2005 at 05:53 #42072
    Diwaker
    Guest

    Hi Minnie,

    Email me your all ur quires on diwaker.sharma@flextronicssoftware.com

    I can help you about ANSI (T1) Treansmission standards and Radio timeslot Mapping etc.

    I would link to know your system vandor and ur network location.

    -Diwaker.

    4th November 2005 at 11:39 #42073
    Garry !!
    Guest

    Hi Minnie,

    T1 consists of 24 channels (unlike its counterpart E1 which has 32 channels) each of 64K.

    Cell planning can be learnt from a book by William LEE. Though you can get variety of vendor planning manuals, make some freinds with your local mobile operator’s network design group. That would be greatly helpful.

    Number of T1s required depends on the site configration and the BSS vendor. On an average 1 T1 would be good for an average site..but again which is dependent on the calculations.

    Revert incase if you require more information.

    Best regards,

    Garry !!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.