Block MTV in AXE

Hi Hercules,

I just interested some information. As far as I know, the MTV block for R9.1 is differ than R8.1. Do you have any information about MTV block for R9.1?

Misa

Hi Reddy,

Here is some brief information for you:

1. Explicit IMSI detach: the MS informs the network that it will leave the network (turn off by the power button), so the network knows the status of the MS is detached. The detached flag for this subscriber will be set in the VLR. When there is an MTC, the network will immediately informs the calling party that “The subscriber you have called is not available” without any paging procedure.

2. Implicit IMSI detach: the MS leave the network without any confirmation (for example due to lost of radio coverage, empty battery…), so the network does not know the current status of the MS. When there is an MTC, the network try to perform paging the MS within the predefined timer. When this timer expired, the network will inform the calling party that the called subscriber cannot be reached.

3. Loiterimg Time: ???

4. Periodic location timer: to prevent the lost of radio resource for paging procedure in case the MS is detached but the network does not know its status, the is the timer called “Periodic location timer” (this is T3212 timer in the ETSI spec). In the idle status, the MS has to perform the periodic location updating when the T3212 timer expired, and the network also monitors this event. If the T3212 expires but the MS does not perform the periodic location updating procedure, the network will treat that it is detached, and then doesnot perform any paging procedure when there is an MTC.

Sorry for my bad english.

Hi All,

I am working in
AXE 810 APZ 212/33 System.
( for wireless system )

Is there any command to put trace on a “specific number” similar to DCSSI in AXE 10 Wirelne switches.

Also in Wireless where the charging related information is stored ( which software block & Hardware Board )
before taking to APG40 for converting to raw CDR Data

hi Scott/all,

I am working in CDMA Systems.. working in
AXE 810 APZ 212/33 System.

Is there any command to put trace on a “specific number” similar to DCSSI in AXE 10 Wirelne switches.

Also in Wireless where the charging related information is stored ( which software block & Hardware Board )
before taking to APG40 for converting to raw CDR Data

if anyone knows pls let me know

Hi all,

I have some doubts regarding the values of timer T3212. if the value of timer T3212 broad casted is zero, the specs says to treat it as infinite and never perform periodic Location update. but suppose that we have not currently updated our current new location to the network and we tried 4 times the LUP and the network rejected with congestion or N/W failure and the value of the timer is also zero then how will the mobile be able to respond to paging. Will the mobile never update the location further after 4 rejects if the location area or plmn also doesn’t changes. please let me know about your opinions .