Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTS

  • This topic is empty.
Viewing 15 posts - 151 through 165 (of 469 total)
  • Author
    Posts
  • #39335
    hardev singh from punjab
    Guest

    Can any one tell me that how many subscribers can a BTS can handle equipped with one E1

    #39336
    hardev from canada
    Guest

    Dear papa ji
    ABTS can handle 32 conversations at a time with E1

    #39337
    shaleen srivastava
    Guest

    dear hardev

    in one E1 i think more conv. can be supported.

    as, one E1 can support idealy 15 TRX cards

    that means 5 sectors(well we are not using 5 sectors but still assuming the ideal case)

    in one sec. we have 8 slots in three cards and 7 slot in one card are used for traffic

    so totally

    ((8*3)+7)*5=155

    so this much no. of calls can be supported by one E1.

    if any other suggestions are there please welcome.

    regards

    #39338
    kamana khare
    Guest

    yes….if half rate is also implemented than the capacity of call handling get doubled

    #39339
    chorgak’a ishaku
    Guest

    hi
    plese could someone help me explain in a better term the difference between a MINI LINK&MICROWAVELINK,PDH&SDH and how it to the term E1

    #39340
    NASSIM
    Guest

    Dear Sheleen
    could you tell me how do you get this 155 , ????so as you said there 4 TRX in each sector
    ((8*3)+7)*5=155
    as far as i know each TRX have 8 time slot and we configure one for BCCH remaning 7
    and our case is 15 TRX so SSS 555
    In each sector we have 5 TRX

    #39341
    Nitin Khurana
    Guest

    Space Diversity Antennas are actually used to to provide uplink gain in microcellular environments where the subsciber are moving with varied velocities.The gain is about 5dBm.

    Nitin

    #39342
    shaleen srivastava
    Guest

    dear nassim

    i had calculated somewrong i’m sory for that
    actually by mistake i had taken 4 sec.
    ya u r abs. right there will be 3 sec. with 5 trx each

    then u can find the right ans.

    again sorry for my mistake

    regards

    #39343
    Reza
    Guest

    Hi

    – Minilink is a name for Ericsson microwave.
    – Microwave is transmission for less than a STM though 64 kbit
    – PDH/SDH is transmission for > 1 STM
    * PDH (Plesyncronous DH ) for single line and still conventional, and SDH ( synch. DH ) for > 1 line main/backup.

    CMIIW

    #39344
    Hemraj
    Guest

    Hi
    please tell me a’bis and chanels.
    I would like to Know about a BSc .How many bts connect a bsc

    Thanks
    Hemraj

    #39345
    chandra bhushan
    Guest

    what is the function of duplexer in bts.

    #39346
    shaleen srivastava
    Guest

    dear chandra bhushan
    i could’t get what u want from me?

    please describe it again .

    regards

    #39347
    pravin
    Guest

    what is the reason of omu block in metro site bts

    #39348
    osprey
    Guest

    hi tanginoa

    if you use ericsson T610, here’s how you check the signal:
    activate the TEMS (simply choose pocket view on), when it’s on look on the top of it if it shows no.1 : u have bcch and rx lev. but i suggest u scroll down to no.2, there u’ll have serving and neighbour list on the left side, and the RxLev on the right side.

    #39349
    osprey
    Guest

    hi K.Rajandran ,

    vsat is a tranciver with a parabolic antenna. it linked to the satellite to reached the other part of the world.
    microwave is ALMOST the same as minilink. it’s also a tranciver but with a radome antenna.usually microwave is used in mobile communication industry.
    vsat has high power in order to reached satellite(more than 1000km). minilink can only reach 10km or so.

Viewing 15 posts - 151 through 165 (of 469 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.