[shaleen srivastava]

hi sandeep
i’m also working on nokia bts in UP west
where are u working now
tell me what u want to know
(except internal signal flow)

i’ll try my best to help u
regards
shaleen

[FADEL]

Hi Rahul Dev Kuthari,
About your minilink question,not just nokia but all minilinks affected due to a river,lake,sea kind of clusters…There will be high interference due to scattering effect of the water.I hope this will help.

Chris,there is no way to understand if the BTS is a 900 or 1800 by its configuration…so 2’2’2 means there are 2 TRX per sector either 900 or 1800..

regards,
fadel
bss eng

[roland]

there is a way to understand if the nokia BTS is 900 or 1800.. just look at the serial number of TRX then you will know if it is 900 or 1800. even in other units just look at serial number. you will see the difference.

[shaleen srivastava]

hello fadel
how life going? must be fine
fadel i have learnt the nokia bts and fiu commissioning but i’m not able to understand the meaning of every setting which we apply there during comm.
can u please put some light on my prob.
i’ll be highly obliged
any other suggestion are also welcome
regards
shaleen srivastava
BTS engg.

[fadel]

Hi Shaleen,
I will try to tell you in a generall way, not vendor specific..When u do commissioning of a bts,there should be a path defined between BSC and Bts..(this is for Abis)..there should be a code for bts..like an IP adress,so that bsc(and then omc) can differentiate from other site..configuration of bts,frequency that is going to be used,output power,path between mw indoor unit and bts interface unit,path for RX part of each TRX should be defined either from site or from OMC(bsc) depending on vendor..

When u commission any type of MW…U need to specify RX and TX frequency,attenuation,output power,fade margin kind of values to obey frequency regulations and with an optimum interferance.

I hope these info will give an overall idea to u.

[gaurav]

I Want to know abut Nortal BTS

[amritpal]

hi,
iam working at delhi on ericsson BTS .pls send me the notes abaut intallation& the comitioning process related to that
……….

[Prabhu]

hi
what are OCSI & TCSI subscriber parameters in hlr, how they can be used?

Prabhu

[shaleen srivastava]

hi fadel sorry for the late reply
thanks for ur support
fadel now i have learnt more about this NOKIA BTS
it would be nioce if we contact through our mails
please if u can mail me

srivastava.shaleen@gmail.com

[Ashish]

Hi,

Everybody. First time i visit this site. Good Site.

I want ot know about traffic flow between Mobile-BTS-BSC-MSC-HLR

If any one of you can, then please.

[Bhavya]

hi… every body

i am working on nokia ultra site bts. i faced few problems while commissioning…
” all base band cards light become steady, tru light become red and bts manager was unable to detect hardware configuration” ple mail me on bhavya_paliwal@rediffmail.com
do tel about bts testing

[S.K.Singam]

Need more information and guideness on installation on this RBS 2106 and 2206.

[Arup Sarkar]

Hi,

I am arup,working in Sasken Networks Engg. Ltd. for last 1 year.
Now I am posted as BSS O&M incharge of NORTEL equipment.
Now request everyone to give me technical support.
please tell me what problems i have to face & what should i do that time.
please mail me
i will be waiting for your replies.

thanks& regards
Arup

[Hi Friends]

I am Kutty working in Mobily (Saudi Arabia’s second mobile phone provider). Generally what are the courses I can contact in the world ? Where are those Institutes ? What are the technical categories in telecom field ?

Would appreciate your great favor.

[C.B.Bhai Patel]

What is VSWR??

[Author]

Posts