Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2206 and 2202 internal operation

Viewing 15 posts - 151 through 165 (of 304 total)
1 2 3 … 10 11 12 … 19 20 21
  • Author
    Posts
  • 21st September 2005 at 05:04 #38948
    shaleen srivastava
    Guest

    hi sandeep
    i’m also working on nokia bts in UP west
    where are u working now
    tell me what u want to know
    (except internal signal flow)

    i’ll try my best to help u
    regards
    shaleen

    10th October 2005 at 19:16 #38949
    FADEL
    Guest

    Hi Rahul Dev Kuthari,
    About your minilink question,not just nokia but all minilinks affected due to a river,lake,sea kind of clusters…There will be high interference due to scattering effect of the water.I hope this will help.

    Chris,there is no way to understand if the BTS is a 900 or 1800 by its configuration…so 2’2’2 means there are 2 TRX per sector either 900 or 1800..

    regards,
    fadel
    bss eng

    11th October 2005 at 20:38 #38950
    roland
    Guest

    there is a way to understand if the nokia BTS is 900 or 1800.. just look at the serial number of TRX then you will know if it is 900 or 1800. even in other units just look at serial number. you will see the difference.

    12th October 2005 at 08:00 #38951
    shaleen srivastava
    Guest

    hello fadel
    how life going? must be fine
    fadel i have learnt the nokia bts and fiu commissioning but i’m not able to understand the meaning of every setting which we apply there during comm.
    can u please put some light on my prob.
    i’ll be highly obliged
    any other suggestion are also welcome
    regards
    shaleen srivastava
    BTS engg.

    13th October 2005 at 21:20 #38952
    fadel
    Guest

    Hi Shaleen,
    I will try to tell you in a generall way, not vendor specific..When u do commissioning of a bts,there should be a path defined between BSC and Bts..(this is for Abis)..there should be a code for bts..like an IP adress,so that bsc(and then omc) can differentiate from other site..configuration of bts,frequency that is going to be used,output power,path between mw indoor unit and bts interface unit,path for RX part of each TRX should be defined either from site or from OMC(bsc) depending on vendor..

    When u commission any type of MW…U need to specify RX and TX frequency,attenuation,output power,fade margin kind of values to obey frequency regulations and with an optimum interferance.

    I hope these info will give an overall idea to u.

    18th October 2005 at 08:14 #38953
    gaurav
    Guest

    I Want to know abut Nortal BTS

    18th October 2005 at 14:27 #38954
    amritpal
    Guest

    hi,
    iam working at delhi on ericsson BTS .pls send me the notes abaut intallation& the comitioning process related to that
    ……….

    22nd October 2005 at 13:03 #38955
    Prabhu
    Guest

    hi
    what are OCSI & TCSI subscriber parameters in hlr, how they can be used?

    Prabhu

    23rd October 2005 at 17:07 #38956
    shaleen srivastava
    Guest

    hi fadel sorry for the late reply
    thanks for ur support
    fadel now i have learnt more about this NOKIA BTS
    it would be nioce if we contact through our mails
    please if u can mail me

    srivastava.shaleen@gmail.com

    24th October 2005 at 05:49 #38957
    Ashish
    Guest

    Hi,

    Everybody. First time i visit this site. Good Site.

    I want ot know about traffic flow between Mobile-BTS-BSC-MSC-HLR

    If any one of you can, then please.

    5th November 2005 at 11:23 #38958
    Bhavya
    Guest

    hi… every body

    i am working on nokia ultra site bts. i faced few problems while commissioning…
    ” all base band cards light become steady, tru light become red and bts manager was unable to detect hardware configuration” ple mail me on bhavya_paliwal@rediffmail.com
    do tel about bts testing

    8th November 2005 at 07:58 #38959
    S.K.Singam
    Guest

    Need more information and guideness on installation on this RBS 2106 and 2206.

    11th November 2005 at 12:16 #38960
    Arup Sarkar
    Guest

    Hi,

    I am arup,working in Sasken Networks Engg. Ltd. for last 1 year.
    Now I am posted as BSS O&M incharge of NORTEL equipment.
    Now request everyone to give me technical support.
    please tell me what problems i have to face & what should i do that time.
    please mail me
    i will be waiting for your replies.

    thanks& regards
    Arup

    18th November 2005 at 11:27 #38961
    Hi Friends
    Guest

    I am Kutty working in Mobily (Saudi Arabia’s second mobile phone provider). Generally what are the courses I can contact in the world ? Where are those Institutes ? What are the technical categories in telecom field ?

    Would appreciate your great favor.

    22nd January 2006 at 12:05 #38962
    C.B.Bhai Patel
    Guest

    What is VSWR??

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 304 total)
1 2 3 … 10 11 12 … 19 20 21
  • The forum ‘Telecom Design’ is closed to new topics and replies.