Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

call is not going on half rate

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 23rd April 2012 at 08:43 #68143
    Nit
    Guest

    Hi all,
    we are getting some problem in one bsc,as call is not going on half rate,however we changed the frl=99,fru=100 and same for afrl and afru.(all time slot having dual rate).
    pl help

    23rd April 2012 at 09:16 #68144
    Bijoy
    Guest

    Hi
    Check for AMR HR licence in BSC & HR support in TRX.

    Br\\
    Bijoy

    23rd April 2012 at 09:47 #68145
    Nit
    Guest

    Hi Bijoy,
    As u told ,i checked the the PRIFILE in BSC and found that:-
    00760 AMR_HR_IN_USE_IN_BSC NOT IN USE
    00283 HR_FEATURE_IN_BSC ACTIVATED

    However other BSC having same setting although call is going on half rate in those BSC.
    want to figure out one more thing as i think this should be from site end as there are few cell in that problematic BSC where call is going on half rate.
    need ur suggestion.

    23rd April 2012 at 12:23 #68146
    Bijoy
    Guest

    Hi Nit
    Check with ZW7I
    check the license & not the feature

    Also,Check HRS parameter on TRX with ZERO command.

    Br\\
    Bijoy

    30th April 2012 at 19:46 #68147
    Agha
    Guest

    Check the switch for conversion of F/H,like in Huawei-“TCH rate adjust allowed”.if this parameter is enabled than adjust utilization of F and H.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.