- This topic has 1 reply, 1 voice, and was last updated 13 years, 2 months ago by
.
-
Posts
-
Hi PIX,
Why is it in ALU, Say we have TRX1,2,3,4. Once TRX 3 is bad or say 2, most allocations begins with this trx and this is really bad even when trx 4 is good.
NO Pref marks are set. ALU B10
Hi Segs,
There are more allocations on TRX3 (in your example), because there is a statistical effect. The allocations do start on TRX4, as before the problem. Let me explain:
If, before the problem, tch allocations split was:
trx1 = 100
trx2 = 300
trx3 = 400
trx4 = 400after the problem, the TCH that are established in trx3 are dropped almost immediately. Therefore trx2 and trx1 are not geting their share anymore, the allocations are stuck in trx3:
trx1 = 0
trx2 = 0
trx3 = 1000
trx4 = 400On top of that, the people are trying to make a new call if the 1st one was dropped quickly.
Regards
pix
- The forum ‘Telecom Design’ is closed to new topics and replies.
