Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

paging lod relation with mfrms and pg ty

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 22nd September 2010 at 06:14 #64383
    herman
    Guest

    guy, please share your opinion, i have some problem with lac dimentioning.
    replacing lac spliting, do we have any parameter setting to overcame paging load? let say, what parameter had sygnificant impact for paging load?, what impact to paging load if we resize paging group?

    3rd November 2011 at 19:29 #64384
    Mike
    Guest

    I think increasing MCCCH is very power full doubling paging capacity or more according to no. of MCCCH

    15th November 2011 at 13:07 #64385
    deb
    Guest

    hi herman,

    to reduce paging load u need more paging channel. so first of all find out the cells having combined sdcch means sd is on BCCH.

    make it to non combined made. keep the sdcch on 2nd timeslot.

    by that way u can get more control channel block in a 51 multiframe. also please share the parameter setting mfr and agbl in ur network, so that we will work out on this

    16th November 2011 at 09:45 #64386
    shankar singh
    Guest

    Hi,everyone i am sr.optimizer,i love 2 share my views here..

    16th November 2011 at 16:54 #64387
    Mike
    Guest

    Hi all

    The feature MCCCH is provided to increase the capacity for paging, immediate
    assignment and channel requests in the network. This is made by introducing
    the channel combination VI (according to 3GPP TS 45.002) BCCH + CCCH.

    When using a LAPD Concentration Factor > 1 and MCCCH is used a maximum
    of 3 CCCH channels can be used. This is due to that the LAPD link load is
    close to or above the recommended maximum value of 80% when using 4
    CCCH at their full capacity.

    When using Packet Abis with MCCCH the maximum of 4 CCCH channels
    per cell can be used

    16th November 2011 at 16:59 #64388
    Mike
    Guest

    Hi all,

    you can use parameter CCCH from 1 to max 4.

    Multiple CCCH is used in order to increase paging capacity in cells. Multiple
    CCCH means that up to 4 time slots can be configured with CCCH blocks. The
    new CCCH channels shall be configured on TN2, TN4 and TN6 on the BCCH
    carrier.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.