Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ALU_Paging coordination

Viewing 15 posts - 1 through 15 (of 16 total)
1 2
  • Author
    Posts
  • 16th June 2010 at 17:55 #63216
    Van_G
    Guest

    Hi Pix,
    did you know is it possible to activate paging coordination features in ALU_B10 or there is something else without using Gs interface.The problem is when user is in a active data session,voice call get missed(no CS paging).
    Regards,

    rb_bg

    17th June 2010 at 01:30 #63217
    Pix
    Guest

    Hi,

    in b10 only the Gs interface can fix this problem.
    in b11, there is another solution : the bsc coordination.

    regards
    pix

    17th June 2010 at 05:42 #63218
    Van_G
    Guest

    Hi Pix,
    thank you for your answer..
    Have a nice day :)))
    BR,

    18th June 2010 at 06:28 #63219
    Mania
    Guest

    Hi Pix and Van_G,
    Not that familiar with Paging coordination could you please share more information on this feature…

    19th June 2010 at 08:28 #63220
    pix
    Guest

    mania,

    paging coordination is a feature that allows CS Paging to reach MS which are in Packet Transfer Mode.

    Paging coordination can be done with Gs interface, or with a special feature in the BSC. In ALU, the Gs is supported since B10 or B9, while the “BSC Paging Coordination” is supported in B11 only.

    I think all details are in the previous posts, but if you need anything more, let me know 🙂

    regards
    pix

    21st June 2010 at 07:21 #63221
    Mania
    Guest

    Hi Pix,
    Could you pls send the details of this feature to erlangmania@yahoo.com

    Thanks

    7th February 2011 at 09:08 #63222
    Van_G
    Guest

    Hi Pix,
    I need your help !!
    We use B11 and tried to activate the Paging Coordination for some BSCs…
    Did you know which are the Indicators that are related to this feature activation? I was cheked my indicators related to the paging, but there is no changes after activation? And we just activated EN_BSS_Paging_coordination and EN_IR_UL on BSC level.Is it enough or there are some additional parameters?
    Thank you in advence ,
    BR

    7th February 2011 at 09:47 #63223
    pix
    Guest

    hi van G,

    P390a > Number of CS paging requests coming from the BSC received by the GPU

    P390b > Number of CS Paging messages sent on PACCH

    Indicators:
    GCPGRQGN: CS_Paging_Request_received GCPGMPACN: CS_Paging_Sent_MS_PACCH_PTM
    GCPGMPACR: CS_Paging_Sent_MS_PACCH_PTM_rate

    The feature EN_IR_** is not useful at all.
    On the other hand, T_SEND_MULTIPLE_PAGING_COMMAND and NB_MAX_MSG_MULTIPLE_PAGING_CMD are quite useful.

    Regards
    pix

    7th February 2011 at 10:04 #63224
    Van_G
    Guest

    Thank you Pix !!!
    I’ll check it ….

    7th February 2011 at 12:59 #63225
    Van_G
    Guest

    Hi Pix,
    are there parameters in MFS which are related to paging coordination because in DOC for parameters in BSS there are rules that this parameter should be the same as in MFS..I can’t find it in MFS level..
    For your note about T_SEND_MULTIPLE_PAGING_COMMAND and NB_MAX_MSG_MULTIPLE_PAGING_CMD I also can’t find it in BSC/BTS/cell level…

    9th March 2011 at 13:58 #63226
    Van_G
    Guest

    Hi Pix,
    We implemented the “BSS paging coordination” in our network. For the moment everything looks ok…
    My question is, is there any problems as congestions, fails or overloads which we can expect and with which indicators we can monitor them?

    10th March 2011 at 05:43 #63227
    pix
    Guest

    hi,

    for monitoring:

    pix – 7 Feb 2011

    hi van G,

    P390a > Number of CS paging requests coming from the BSC received by the GPU

    P390b > Number of CS Paging messages sent on PACCH

    Indicators:
    GCPGRQGN: CS_Paging_Request_received GCPGMPACN: CS_Paging_Sent_MS_PACCH_PTM
    GCPGMPACR: CS_Paging_Sent_MS_PACCH_PTM_rate

    The feature EN_IR_** is not useful at all.
    On the other hand, T_SEND_MULTIPLE_PAGING_COMMAND and NB_MAX_MSG_MULTIPLE_PAGING_CMD are quite useful.

    Regards
    pix

    8th August 2012 at 22:15 #63228
    Rex
    Guest

    Hi,
    When Paging Coordination is enabled, is it mandatory to enable EN_RA_CAP_UPDATE (Radio Access Capability)? What’s it’s role indeed?
    Best regards,
    Rex

    11th August 2012 at 20:43 #63229
    Rex
    Guest

    It seems everybody is on vacation!

    6th September 2012 at 21:23 #63230
    Rex
    Guest

    Hi,
    When Paging Coordination is enabled, is it mandatory to enable EN_RA_CAP_UPDATE (Radio Access Capability)? What’s it’s role indeed?
    Best regards,
    Rex

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 16 total)
1 2
  • The forum ‘Telecom Design’ is closed to new topics and replies.