Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Mobile Hang Problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 17th July 2008 at 08:05 #53125
    RF RG
    Guest

    Dear All,

    I am having 2 problems:

    1.) Whenever we receive or dial any no. after disconnecting the phone, it doesn’t get disconnected and the phone hangs up in both cases.

    2.) Whenever we call some one or when we receive the call after talking for
    few seconds , call gets blocked and no. automatically starts redialling in
    former case and no. goes in missed call in later case. i.e, blank
    call.

    Please let me know at which end i have to look for and what will i do to rectify the same.

    Regards

    17th July 2008 at 19:57 #53126
    pix
    Guest

    have you performed a drivetest to see what kind of messages are exchanged on the air interface ?

    if everything is normal, then the MS is probably faulty
    otherwise, you will certainly see that “crazy” messages are sent by your core network (MSC, IN, ?) to the MS.

    (ps : i don’t understand your first question)

    18th July 2008 at 07:22 #53127
    RF RG
    Guest

    Dear Pix,

    Thanx for the reply… The initial case is that after the conversation im not able to disconnect a call at a sudden (my mobile hangs up). I am not able to end the call at that time.. This is not happeneing frequenctly but is happen out of 2 to 10.

    18th July 2008 at 08:30 #53128
    pix
    Guest

    RF RG,

    is the problem happening with your mobile only ? or does it happen all over the network ?

    in the first case, you should replace your phone… i used to have a samsung phone, and it “hangs” like this all the time. My mother also has a samsung, and she can’t even receive phone calls.. 🙂

    19th July 2008 at 14:16 #53129
    RF RG
    Guest

    Hi Pix,

    As escalated by the customer, this problem is happening in 1 BSC only. Its not with my handset but the handset of some customers.

    Do u think that the problem is related to Cell or BSC level or it is the problem at the Switch end.

    19th July 2008 at 18:22 #53130
    pix
    Guest

    rf rg,

    in my opinion, this is a MS problem ! i suggest you go meet some subscribers, check the problems with your own eyes, perform the same test with a trace MS and your own personal MS, see if the problem appears.
    if it doesn’t, exhange the MS of the subscriber.
    if it does, analyze the traces.

    regards,
    pix

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.