Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tekelec Eagle STP Limitation Help

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 10th April 2006 at 12:07 #44827
    Sid
    Guest

    Hi ! I am working as engr in India and facing problem in blocking the SCCP traffic which met following criteria :

    – A perticular SCCP CLG Add ( e164 )
    – From a perticular OPC

    Need to allow the same SCCP Clg from other OPCs.

    As per Vendor this cannot be done as the SCCP Addressig schecme in India ( Asia ) is ITU and it does not make it mandatory for operators to put OPC in SCCP Addr. And hence we have all the SCCP Address as : RI = GT, PCI = not defined, SCCP Cld = e164 address, NP = e164, TT =0, SSN = HLR/VLR/MSC etc.

    Pl Help.

    Sid

    12th September 2017 at 19:04 #44828
    samuel gonzalez
    Guest

    Hi,

    I´m looking a traffic modeling document for Tekelec STP

    14th September 2017 at 18:07 #44829
    Wallis Dudhnath
    Guest

    Check if you have a SCCP Policing Mask activated. If not ask your Vendor (e.g. STP) if they have this Feature. Next check if you have configured your GTRC tables. Your tables will need to be setup so that the SCCP information can be analysed.

    VBR/ Wallis Dudhnath

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.