Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ess,esr values in AXE

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 17th June 2004 at 14:49 #38495
    Styrus
    Guest

    If a call is originating in MSC1 and passing through MSC2 to PSTN.

    What should be ess,esr values in MSC1 and MSC2 to include echo canceller in both Mobile-PSTN & PSTN-Mobile calls.

    Any AXE expert listening..

    18th June 2004 at 05:44 #38496
    S.Vijay
    Guest

    ESS-1 ( Sending Side EC )
    ESR-1 ( Receiving Side EC )

    18th June 2004 at 08:16 #38497
    Styrus
    Guest

    As two MSCs come into picture in single call, Pl specify individual settings to be done in each MSC.

    Thanks

    23rd June 2004 at 08:47 #38498
    S.Vijay
    Guest

    If the Link is like

    MSC to MSC on your Own Transmission Network Then there is no need for ECs.

    If you link both MSCs through PUBLIC Network…then you can apply if you have ECHO…

    Do testing to find out..by applying the EC and removing the EC.

    You may not feel much difference.

    Very useful in cae of Long distance calls.

    Rgds

    1st July 2004 at 07:38 #38499
    ANAND
    Guest

    We use ESR value 1 for a POI route with PSTN.
    Why we do not use ESS. This is put as 0 only in AXE 10.

    How Echo cancelers works and why Echo is generated. Can some Expert Throw lite on this….

    1st July 2004 at 17:47 #38500
    S.Vijay
    Guest

    Hi ANAND..

    You must be having ALEX ?

    Rgds

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.