VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Telnet A800 for CDR

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 25th January 2004 at 06:54 #26262
    Jake
    Guest

    Hello All,

    Am not using any cdr software currently.

    I telnet into the A800 using WinXP as follows:

    Telnet xxx.xxx.x.xxx and it goes to a screen CONEXANT SYSTEMS INC. ACCESS RUNNER ADSL CONSOLE PORT 3.21

    It requests a password…I type the pc password…it rejects…I type the Tenor password….it rejects

    Any one can help?

    Thanks

    25th January 2004 at 18:10 #26263
    Noname
    Guest

    That is not the A800. You are ,most likely,talking to the ADSLrouter/modem.

    When you talk to the A800, the telnet screen will look like this:

    Welcome to Tenor Multipath Switch Telnet Server
    Serial #: A002-xxxxxC | Name: xxxxxxxxxl01 | Type: A400 | UTC: Unknown
    Connected from IpAddr/Port# 67.xxx.xxx.xx3/3807 to Port# 23

    Quintum:xxxxxxxx101> Password:

    If you get a null modem cable, you could do the same from the console port.

    From a COM port on your PC or laptop, using a null modem cable. setup it for 9600, no parity, one stop and one start bit.

    25th January 2004 at 23:40 #26264
    www.voiphelp.net
    Guest

    Hello,
    The default baud rate for the console port of the quintum is 38400. 8N1, no flow control for the rest of the settings.
    support@voiphelp.net

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.