Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Forward a POTS line

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 20th August 2003 at 14:41 #25038
    VOIP Newbie
    Guest

    I am new to these VOIP equipment I was wondering if there was a way of forwarding a pots phone line from one location to another by using 2 Cisco UBR924? Basically have a phone # at one location and tie it to another ubr924 at the other location? I am thinking I probably need to do FXO to FXS is this correct. These ubr924 modems are FXS ports at both ends. Thanks

    21st August 2003 at 21:19 #25039
    vurcos
    Guest

    This is very possible. It really depends on the functionality of the equipment.

    I’ve done this on a VegaStream 8 port FXO calling another 8 port FXO Vega.

    so: PSTN—FXOCalifornia—via H.323/SIP/MGCP/whatever—FXONew York—PSTN

    The Vega in California would receive a call on its POTS ports (vega contains dialing rules) and sends the call to the FXO in New York via VoIP, then the Vega in New York will have a pre-configured number to send the call to.

    very basic and easy to setup.

    25th November 2003 at 05:58 #25040
    Andrey Tsadikov
    Guest

    Vurcus hi!
    I want to make some configuration to the new vega50 and conect to him 8 analog lines .
    It is possibule?
    How I need to do it?
    Can you help me with configuration?

    25th November 2003 at 08:01 #25041
    Dan C
    Guest

    VOIP Newbie,

    Yes you are right .. you need to have the FXO on the POTS side and the FXS on the other.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.