VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Setup Cisco MC3810 with Carrier Access

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 23rd February 2002 at 07:55 #21279
    Jafon
    Guest

    I have a Cisco MC3810 that I am using with a Carrier Access channel bank with FXO cards and loop start.

    Anyone have any pointers on setting them up properly. Presently experiencing problems.

    18th August 2002 at 19:57 #21280
    Supoade
    Guest

    you cannot setup CAC with loop-start sinalling cos the CAC Channel bank does not support ans supervision for FXO

    you could try E&m

    let me give the circiuts setting for your cisco gateway for Carrier Access

    framing esf/sf
    linecode bs8z/ami
    ds0-group 0 timeslots 1-24 type e&m-immediate-start

    choose the right franming & linecode for the CAC

    Let me know exactly your solution i could further in setting up your voice card

    23rd August 2002 at 20:18 #21281
    ronald
    Guest

    Hi Jafon,
    I want to config MC3810 for VOIP. Can you let me know what parts do I need? eg.
    MC3810-HCM6
    MC3810V3

    etc.

    email: ronald9992@hotmail.com

    1st October 2002 at 18:20 #21282
    Mario
    Guest

    Hi Jafon:

    Can you please tell me where do you get the Mc3810 with the HCM6 cards?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.