Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Handover parameter and Cell Resection

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #61063
    Varun sharma
    Guest

    Hi pix,
    Need ur help,I want to know about LMRG,QMRG and PMRG & what shud be the exact threshold value for these parameters of handover in GSM.

    2)one more thing, Cell reselection parameters like(Rx access min,Cell resect hysteresis,Cell reselect offset,penalty time and Rx reslect hysteresis) all these parameters are uses to avoid ping-pong in border cells.
    So I want to know the exact threhold values of above parametrs and meaning of Penalty time.

    “Thanks in advance, i hope u will reply”

    #61064
    bjushka
    Guest

    HI,

    Penalty time, is the time period when the MS will access the cell.
    BR
    Bjushka

    #61065
    pix
    Guest

    hi varun,

    1) i dont know those parameters, i only work with ALU systems.

    2) penalty time is used when a MS detects a neighbour cell : durin “penalty-time”, the C2 of the neighbour cell is decreased by “temporary-offset”. When these duration is expired, the C2 of the neighbour is put back to its normal value.
    rxlev access min = -104dBm
    cellr eselect hysteresis = 6dB
    cell reselect offset = 0dB
    penalty_time = 20s
    temporary offset = 10dB
    Rx reseect hysteresis : i don’t know this one. it is not standard.

    Cheers
    pix

    #61066
    LodeAvoivydor
    Guest

    Hi to the community wanting to get some new knowledge…

    #61067
    khushal singh
    Guest

    default value to PMRG, LMRG, QMRG in GSM

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.