DX 200 GW212 2017-06-09 14:12:05
ALARMS CURRENTLY ON
GW212 CHU-0 SWITCH 2016-12-05 11:21:56.69
*** ALARM VDS-0 VIDAST
(0001) 2650 STORING OF THE DATA FAILED ON ONE DISK
WDU 01 11615d
jack - 11th June 2010 (06:19 GMT)
i want to know the purpose of this commands?
and what is the description of message number 9389?
and also in NOKIA BSC 3i we have an extension of service terminal named:RCBUGG
with this extension we can replace the MML commands in the US command group (Working State
and Restart Handling) in situations in which the OMU is not in use and the
MML commands cannot be executed.
i want to know step to step which commands should apply for this ???
jack - 11th June 2010 (05:52 GMT)
i can not find your sharenet-IMS forum.
please send me the URL.
kamal - 23rd January 2010 (11:25 GMT)
Hi,check in our sharenet-IMS forum..I have posted doc about the service terminal extensions..
Zbigniew - 21st January 2010 (13:06 GMT)
the service terminal was started on the active MCMU of a BSC with MML command ZDDS:MCMU,0.
In the service terminal I used the commands
ZOEBF clear the monitoring buffer
ZOEQ destroy the monitoring buffer
ZOEBR::3FFFFF,0 set buffer size
ZOEC::SR:(NUM=9389) monitor message 9389
ZOEM start monitoring
ZOES stop monitoring after 10 min
ZOEG generate the output
kamal - 21st January 2010 (12:57 GMT)
in which unit & using what extension u r getting this output?
Zbigniew - 21st January 2010 (09:58 GMT)
what is meaning of the DX200 message number (here: 9389) and the message data (starting with 0C) in Service Terminal (ZDDS) ? Here is an example output: