Free Erlang traffic calculators

The world's first online Erlang traffic calculators

Telecom Traffic Online
  Home | Free calculators | Products | Tech. papers | Forum | About us
Erlang for Excel
A-Z termination using H.323 and SIP
A-Z termination
  • VoIP softswitch

    DUAL Softswitch is a complete Voice over IP switching and billing solution.  Flat monthly rate.

    Web control panels; Least Cost Routing; Excel tariff uploads; SIP and H323 support.

    H323 SIP softswitch >>

  • VoIP calling

    Premium quality termination for wholesale carriers with their own VoIP switch.

    44Direct >>


    Our lowest rates for wholesale carriers with their own VoIP switch.

    44Mobile >>


    Our unique online callshop billing system.

    Bill My Calls >>

Concurrent calls

TDC - 7th February 2018  (07:23 GMT)

How to change Erlang to MBPS?

Suppose i have 1000 Erlang in bussy hours, and my max number of concurent call is 1500, so how could found the utilization based on 1500 concurrent call usage?

Pan - 3rd January 2010  (19:18 GMT)

Hello, Pix!
Happy New Year! :)

pix - 2nd January 2010  (21:38 GMT)

hi pan,

50.000 erl = # calls * (50s / 3600s)

therefore :

1/ # calls = 3.6 millions
2/ you are 100% right
3/ i'm embarassed :)

was i drunk when i replied to this message ?

:))

thanks for correcting me !

Cheers & happy new year,
-pix

Pan - 2nd January 2010  (19:08 GMT)

Hello, guys! :)
Sorry, Pix, but 50 000 Erlangs is enough great value. But 1000 calls per hour is enough small value.
Load intensity=50 000 erl represents the total holding time (in sec)= (50 000*3600)= 180000000.
And, hence,
BHCA=(180000000/50)=3600000 calls, i.e 1,8 calls per subscriber in busy hour.
B.R.

Pix - 3rd November 2009  (15:44 GMT)

Keith,

Yes, 25mErl/sub is a typical figure

4/4/4 : 1 BTS with 3 sectors, and 4 TRX per sector.

Sector 1 = 4 TRX
Sector 2 = 4 TRX
Sector 3 = 4 TRX

... 4/4/4 ... :-)

kdriver - 3rd November 2009  (15:38 GMT)

Thanks Pix. That gives me the answers I was looking for.

Is 25mErl/sub an industry standard figure?

What do you mean by 4/4/4 configuration for the BTS?

Cheers,

Keith

Pix - 27th October 2009  (21:19 GMT)

Hello kdriver,

the number of calls is not really relevant, what matters more is the volume of traffic (erlangs)

25mErl / subscriber @ BH x 2 millions = 50 000 erlangs

assuming average call duration of 50 seconds (rather realistic )
50.000 erl / 50 = 1.000 calls

So 2 millions subsribers (typical subscribers) will generate about 1000 calls of 50 seconds, at busy hour, during one hour.

To handle 50k Erlangs, you need about 600 BTS with 4/4/4 configuration :)

Cheers,
pix

kdriver - 27th October 2009  (20:50 GMT)

Hi,

Can anyone give a rough figure for expected busy hour concurrent calls given a subscriber base. ( lets say 2 million? )

Regards,

Keith

Post a reply to this article

Name Enter your name.
Message Enter your message.
Email Optional -  If you enter your email address in this box, then you will automatically be notified if anyone replies to your message.  Your email address will only be published if you pay to post this message.
Verification
Please confirm you are human.
Press the button to post your message.
Home | Free online calculators | Products | Technical papers | Forum | Contact us | About us

Last modified: 17 May 2017

Copyright 2017. All rights reserved.