Call shop billing system A new dawn in callshop freedom
Call Shop Billing System

teleboutique facturation
  Home | How it works | What it costs | F.A.Q | Contact us | Signup | Login FranšaisEspa˝olDeutschItaliano
Bill My Calls

This page explains how to configure your H.323 or SIP gateway or ATA device to send calls to the Bill My Calls system.

  • Pick a booth

    Callshop biller

  • Getting started

    The first step in getting your online call shop billing service is to sign-up for an account online

    Account sign-up >>

  • Control panels

    Once you have an account, click on the link below to sign in to your online call shop billing system.

    Log-in to your biller >>

Setup up your equipment

  • Request provisioning

    Tell us about your VoIP provider.

    We will then set that provider up on our system and switch all of your calls to them.

There are three steps to getting started with Bill My Calls.
This is the Step 2.

VoIP configuration guidelines

We offer specific configuration guidelines for the following calling clients:

General configuration guidelines - SIP

We support all SIP compliant devices.  We suggest you follow these guidelines for configuring your gateway.
  1. Configure your equipment to register at our SIP server at sip.billmycalls.com
  2. Configure your equipment to send calls to our SIP server at sip.billmycalls.com
  3. Set the authentication ID to your Bill My Calls account number.
  4. Set the password to your Bill My Calls password.
  5. Set a unique line ID for each line (or booth).  Our system identifies each booth using this line ID.

General configuration guidelines - H323

We support all H.323 compliant devices.  We suggest you follow these guidelines for configuring your gateway.
  • Configure your equipment to send all telephone calls to a gatekeeper.   The gatekeeper IP address is 95.154.218.4.   If possible, we recommend that you use the DNS name gk1.billmycalls.com.
  • Configure your equipment to register at the gatekeeper using an E164 alias (telephone number) or an H.323 alias.  The alias address should be 1822 followed by your Bill My Calls account number followed by your Bill My Calls password.  For example, if your account number is 200100 and your password is 900100, set the E164 alias to be 1822200100900100.
  • Set a unique line ID for each line (or booth).  Our system identifies each booth using this line ID.

If your public IP address is shared, this type of registration will not be appropriate, because all devices at your public IP address to use your service.  We will need to perform further authentication using your line IDs.  Please contact support@billmycalls.com for further assistance.

Test calls

We offer a simple test facility on our servers that you are welcome to use.  To call it, configure your software or hardware dialler to send calls to Bill My Calls, and then dial 123.  You should hear a test announcement.  If you hear this, then your equipment is set up correctly and you should be able to use Bill My Calls.

There is an additional test service on 124.   This plays the same announcement, but without using NAT penetration.  This can be a useful test of whether your account requires a NAT Penetration service.  Click here for more information on NAT penetration.

Home | How it works | What it costs | F.A.Q | Contact us | Signup | Login

Last modified: 21 January 2015

Copyright ę 2015. All rights reserved.